Keep a setup sheet for your vehicle

Every vehicle in your Garage has a setup sheet, so the jetting, gearing, and chassis settings you ran sit next to the laps they produced. You keep it as named baselines plus a heat for each run, and every session can show the setup it ran on.

Where it lives

1. Open the Garage tab and tap a vehicle.
2. The vehicle page has four tabs: Setup (today), Tires (tire sets and usage), History (past heats), and Details (type, notes, archive, delete).
3. On Setup, the switch below the conditions card flips between Heats and Baselines.

What the sheet holds

• Karts get a full template: Tyres (make, compound, tire set), Chassis (track widths, ride heights, seat position), Axle and hubs, Geometry (caster, camber, toe), Drivetrain (sprockets, chain pitch), Engine (main jet, needle, needle clip, float height, carb high and low, plug), and Weight (driver weight, ballast), plus a note.
• Car, Motorcycle, and Other vehicles get the note only, plus the paddock conditions block on each heat.

Baselines: your starting points

1. On Setup, switch to Baselines and tap New baseline.
2. Name it — "Dry high grip", "Wet" — and fill in its setup fields, then tap Save.
3. Tap Archive to retire one. Archived baselines stay listed under Archived but can't start a heat, and archiving can't be undone.

Any heat can become a baseline with Save as baseline. Editing a baseline never changes heats already started from it.

Heats: what actually ran

On race day you log each run as a heat, started from a baseline, from your last heat, or blank. See Race-day heats and baselines.

On a session

A session's Setup tab shows its conditions, the heat it ran on, and its Tire check readings: pressures, temperatures, wear tags, and photos. The session must be assigned to a vehicle first — otherwise you'll see Group this session to a vehicle to keep a setup sheet and a Group by vehicle button.

Good to know

• The setup sheet is Free. Past heats on History are Pro — see Setup history: see what changed between runs (Pro).
• Setup sheets sync between your devices with cloud sync, like your sessions.
• If you kept a sheet before heats were introduced, the Setup tab offers once to Save as “Current”, turning it into your first baseline.
• Team vehicles have their own sheets — see Team setup sheets and race-day heats.

The Tyres values on a setup sheet describe the setup; the vehicle's Tires tab tracks fitted sets and usage over time. See Manage tire sets for your vehicle.